Konstrukcinio termoizoliacinio betono atsparumo aukštai temperatūrai tyrimai
Beinoras, Lukas | Darbo ir gaisrinės saugos katedra |
Baigiamajame darbe nagrinėjama termoizoliacinė konstrukcinė betono kompozicija, kuri susideda iš akytojo betono atliekų ir pačių gausiausių Lietuvoje technogeninių mineralinių atliekų - ekstrakcinio pushidračio fosfogipso. Pagrindinis darbo tikslas yra kompozicijos savybių, veikiant aukštai temperatūrai, tyrimas.Darbe aprašoma statybiniu medžiagų ir akytojo betono klasifikacija, taip pat technogeninių atliekų perdirbimo problemos. Apžvelgiamos fosfogipso perdirbimo technologijos ir aplinkosaugos požiūriu svarbūs jo perdirbimo aspektai. Remiantis anksčiau atliktais tyrimais nustatyta, kad tokios sudėties kompozicijoms tirti nebuvo taikyti aukštos temperatūros poveikiai. Atsižvelgiant į tai parenkami ir atliekami bandymai, pagal kuriuos išnagrinėjamos bandinių gniuždymo stiprio savybės, juos veikiant aukšta temperatūra.Buvo nustatytos kompozicijų fizinės savybės - rišimosi trukmė, tankis, įgėris. Paveikus kompozicijas aukšta temperatūra, nustatomi bandynių gniuždymo stiprio, tankio ir masės pokyčiai. Nustatyti gniuždymo stiprio sklaidos rezultatai. Baigiamajame darbe gauti rezultatai gali būti panaudoti tolimesniems tyrimams, siekiant pritaikyto fosfogipso atliekas ir akytojo betono atliekas ugniai atspariems gaminiams gaminti.Darbo apimtis 53 puslapiai be priedų, 10 lentelių, 24 iliustracijos ir 54 bibliografiniai šaltiniai.
The thesis examines the composition of structural concrete for thermal insulation, which consists of porous concrete waste and extractive hemihydrate phosphogypsum - the most abundant mineral of technogenic waste in Lithuania. The main goal of the thesis is to test and analyze the composition properties at high temperatures.The paper describes the classification of construction materials and aerated concrete, as well as processing problems of technogenic waste. An overview of phosphogypsum processing technology and environmentally relevant aspects of its processing are provided as well. According to earlier studies, it was found that such compositions have not been studied with the application of high-temperature. Accordingly, tests are selected to examine the compressive strength properties of the specimens, when exposed to elevated temperatures.The physical properties of compositions - setting time, density, absorption were determined. The compressive strength, density and mass change of the specimens at high temperatures were also measured as well as the results of compressive strength dispersion. The findings of this thesis can be used for further research, aiming to adapt phosphogypsum waste and porous concrete waste for the production of fireproof materials.This thesis consists of 53 pages, 11 tables, 25 figures and 54 references.