Research of steel facing qualities after welding with self protecting welding wire
| Author | Affiliation |
|---|---|
| Year | Issue |
|---|---|
1997 | 2(5) |
Atliktas ikieutektoidinio plieno apvirinimo "Innerschield" tipo vielomis tyrimas. Nustatyta, kad keičiant suvirinimo greitį galima pasiekti 51HRC apvirinto sluoksnio kietumą. Didžiausios kietumo reikšmės gaunamos apvirinant pagal gamintojų siūlomas apvirinimo proceso charakteristikas. Apvirinto sluoksnio kietumui didelę įtaką turi anglies kiekis savisaugėje vieloje. Atleistos terminio poveikio zonos metalo struktūra ir geometriniai parametrai priklauso nuo apvirinimo režimų (suvirinimo greičio, įtampos ir kt.).
The most optimal weld bead exploitation characteristics with respect to hardness, geometry of joint and effect of heat to the base metal are reached when welding with the optimal process characteristics recommended by the manufacturer. "Innerschield" type wires may be used for repair of high-carbon, difficult to weld hyper-eutectoid steel constructions without using heat treatment after welding. On the basic of test results it was established that when the speed of welding is increased the hardness of weld bead is increased one and a half times and can be amounted to 51 HRC. The highest hardness may be reached when facing with the optimal process characteristics are recommended by manufacturer. The content of carbon in self-protecting wires has the most influence on hardness of weld bead.